Download ASTM A123/ A123M Standard Specification for Zinc (Hot-Dip Galvanized) Coatings

This specification covers the necessities for zinc coating (galvanizing) by the hot-dip course of on iron and metal merchandise constructed from rolled pressed and solid shapes, castings, plates, bars, and strips.

Obtain ASTM A123/ A123M Normal Specification for  Zinc (Sizzling-Dip Galvanized) Coatings on Iron and Metal Merchandise

1. This specification covers each unfabricated merchandise and fabricated merchandise, for instance, assembled metal merchandise, structural metal fabrications, massive tubes already bent or welded earlier than galvanizing, and wire work fabricated from uncoated metal wire. This specification additionally covers metal forgings and iron castings included into items fabricated earlier than galvanizing or that are too massive to be centrifuged ( or in any other case dealt with to take away extra galvanizing tub metallic). Norn 1-This specification covers these merchandise beforehand addressed  in Specs A 123- 78 and A 386- 78. 1.3 This specification doesn’t apply to wire, pipe, tube, or metal sheet which is galvanized on specialised or steady traces, or to metal lower than 22 gage (0.0299 in.) [0.76 mm] thick. 
2. The galvanizing of {hardware} gadgets which are to be centrifuged or in any other case dealt with to take away extra zinc (such as bolts and related threaded fasteners, castings and rolled, pressed and solid gadgets) shall be in accordance with Speci­fication A 153/A 153M.
3. Fabricated reinforcing metal bar assemblies are lined by the current specification. The galvanizing of separate reinforcing metal bars shall be in accordance with Specification A 767/A 767M. 
4. This specification is relevant to orders in both inch-pound models (as A 123) or SI models (as A 123M). Inch­ pound models and SI models usually are not essentially actual equivalents. Throughout the textual content of this specification and the place acceptable, SI models are proven in parentheses. Every system shall be used independently of the opposite with out combining values in any approach. Within the case of orders in SI models, all testing and inspection shall be performed utilizing the metric equal of the check or inspection methodology as acceptable. Within the case of orders in SI models, such shall be acknowledged to the galvanizer when the order is positioned.  

Download (PDF, 729KB)

ASTM A123/A123M – 17 PDF FREE DOWNLOAD.

• ASTM A153.
• ASTM A123 VS A653.
• ASTM A385.
• HOT DIP GALVANIZING STANDARD PDF.
• THE REQUIREMENTS LISTED IN ASTM A 123 INCLUDE.
• ASTM A153/A153M.
• ASTM A143.
• HOT DIP GALVANIZING IS CODE.
• CSA G164.
• ASTM A767.
• ASTM A153 HDG.
• ASTM A767 FREE DOWNLOAD.

ASTM A123 SURFACE PREPARATION.

• ASTM A153 PDF FREE DOWNLOAD.
• HOT-DIP GALVANIZING ASTM STANDARD.
• ASTM A153 PDF.
• ASTM STANDARD FOR ZINC COATING.
• ASTM A123/A123M.
• ASTM A123/A123M – 17 PDF.
• ASTM A123/A123M – 17 PDF FREE DOWNLOAD.
• ASTM A123/A123M-13.
• ASTM A123/A123M-15.
• ASTM A123/A123M-02.
• ASTM A123 A123M 09 STANDARD.
• ASTM A123/A123M-09.
• มาตรฐาน ASTM A123/A123M.
• TIÊU CHUẨN ASTM A123/A123M.
• ASTM A123A123M 17 PDF FREE DOWNLOAD.

ASTM A123 STANDARD PDF FREE DOWNLOAD.

• ASTM A123 GALVANIZING THICKNESS.
• ASTM A123A123M 02.
• WHAT IS THE DIFFERENCE BETWEEN ASTM A123 AND A153.
• ASTM A153.
• ASTM A123 GALVANIZING THICKNESS PDF.
• ASTM A153 PDF.