Download ASTM A635 PDF | Speciﬁcation for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon

December 26, 2020

1.1 This speciﬁcation covers hot-rolled, heavy-thickness, carbon industrial metal, drawing metal, and structural metal, sheet and strip. Structural metal could also be ordered when the coils are meant for conversion to plate steels. It’s included for that goal solely.
1.2 In case of any conﬂict in necessities, the necessities of the person materials speciﬁcation shall prevail over these
of this normal speciﬁcation.

1.3 Annex A1 lists permissible variations in dimensions and mass (see Observe 1) in SI [metric] models. The values listed usually are not actual conversions of the values listed within the inch-pound tables, however as a substitute are rounded or rationalized values. Conformance to Annex A1 is obligatory when the “M” speciﬁcation is used.

NOTE 1—The time period weight is used when inch-pound models are the customary. Nevertheless, below SI, the popular time period is mass.
1.4 The values said in both inch-pound models or SI models are to be thought to be customary. Inside the textual content, the SI models are proven in brackets. The values said in every system usually are not actual equivalents; due to this fact, every system should be used independently of the opposite. Combining values from the 2 techniques could end in nonconformance with this speciﬁcation.

1.5 This speciﬁcation and the relevant materials speciﬁcations are expressed in each inch-pound models and SI models. Nevertheless, until the order speciﬁes the relevant “M” speciﬁcation designation (SI models), the fabric shall be furnished to inch-pound models.

Download (PDF, 77KB)