This article is about SAES-M-006 which is about Saudi Aramco Security and General Purpose Fencing and download SAES-M-006 PDF for Structural and Civil engineers, supervisors and project managers, Structural QCs, Civil QC Supervisors. This is saudi aramco standards of Onshore Structures Engineering based on international codes and standards and useful for Structural and Civil Engineering knowledge to get job as engineers, QC Supervisors and QC managers, Engineering managers and technicians.
SAES-M-006 PDF Download
SAES-M-006Saudi Aramco Security and General Purpose Fencing
The SAES-M-006 Standard provides mandatory requirements for the design and installation of Saudi Aramco Security and general-purpose fencing. It is specifically intended for the protection of non-vital or non-sensitive facilities. For fencing required for vital or sensitive facilities, as defined in SAES-O-100 General Requirements Safety and Security Standards, the Saudi Aramco Safety and Security Standards (SAES-O-Series) should be followed.
In summary:
- SAES-M-006 covers the design and installation of fencing for non-vital or non-sensitive facilities.
- SAES-O-Series (including SAES-O-100) should be referred to for fencing requirements for vital or sensitive facilities.
These standards ensure that appropriate fencing measures are in place to address the specific security needs of different types of facilities.
Industry Codes and Standards for SAES-M-006
American Society for Testing and Materials (ASTM):
- ASTM A53: Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded, and Seamless
- ASTM A121-99: Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
- ASTM A123: Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
- ASTM A153: Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
- ASTM A392: Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
- ASTM A641: Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
- ASTM F626: Standard Specification for Fence Fittings
- ASTM F668: Standard Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric
American Welding Society (AWS):
- AWS D1.1: Structural Welding Code – Steel
Design
In the provided text, several design requirements and specifications for Saudi Aramco Security and general-purpose fencing are outlined. Here are the key points:
4.1: The type of fencing required is determined by operational, safety, and security requirements and should follow Standard Drawing AB-036677.
4.2: The use of reclaimed material is not permitted without written approval from the Proponent Organization.
4.3: Saudi Aramco Security Fencing Type I is to be used for facilities with security concerns, with security levels descending from Type I to Type V.
4.4: Saudi Aramco fencing should be constructed according to referenced Engineering Standards and Standard Drawings (AB-036677, AA-036678, AB-036679, AC-036680, AE-036881, AE-036882, AE-036883, AE-036884, and AE-036904).
4.5: Saudi Aramco Security Fencing Type I, II, III, IV, and V, as well as General Purpose Fencing, should be made of zinc-coated galvanized or vinyl-clad galvanized materials, including steel wire fencing, fence posts, rails, gates, barbed wire, tension wire, and tie wire.
4.6: Galvanized fabric and hardware are to be used for inland locations, while vinyl-clad fabric, barbed wire, tension wire, tie wire, and gate infilling can be used within 1.5 km of the sea. However, galvanized fabric and hardware must be used for fencing enclosing or crossing over a ground grid and passing under overhead powerlines of 230 kV and above, regardless of location.
4.7: The bottom of the chain link fabric for Saudi Aramco Security Fencing Type I should be tied to a continuous concrete anchor as per Standard Drawing AC-036680.
4.8: Tubular steel posts specified in the Purchase Order and/or drawings should be Schedule 40 and galvanized in accordance with ASTM A53. The post diameters should follow Table 1 of the standard.
4.9: Concrete for footings and grade beams should have a minimum compressive strength of 27.6 MPa (4000 psi) at 28 days. The post footing should be coated with two coats of coal tar or bitumen coating according to SAES-Q-001.
4.10: The concrete material should comply with 09-SAMSS-097 “Ready-Mixed Portland Cement Concrete.”
4.11: Table 2 provides a list of different types of Saudi Aramco fencing.
4.12: Table 3 outlines applicable gate sizes for each type of Saudi Aramco fencing, measured from inside to inside of the gate posts.
4.13: Total post length, including a 975 mm extension in the footing, should follow the specifications in Table 4 – Post Lengths (±12 mm) for posts up to 102 mm O.D. (outside diameter).
Please note that the information provided is based on the given text and it’s always important to refer to the latest version of the standards and consult the appropriate authorities or documentation for precise and up-to-date requirements.
FAQs about SAES-M-006 PDF Download
Q1: What determines the type of fencing required for a facility?
A: The type of fencing is determined by operational, safety, and security requirements. The specific type of fencing to be used should follow Standard Drawing AB-036677.
Q2: Can reclaimed materials be used for the fencing?
A: The use of reclaimed material is not permitted without written approval from the Proponent Organization.
Q3: What are the different types of Saudi Aramco Security Fencing?
A: Saudi Aramco Security Fencing includes Type I, II, III, IV, and V, with security levels descending from Type I to Type V. The appropriate type is chosen based on the security concerns of the facility.
Q4: Which materials are recommended for Saudi Aramco Security and General Purpose Fencing?
A: Saudi Aramco Security Fencing Type I, II, III, IV, and V, as well as General Purpose Fencing, should be made of zinc-coated galvanized or vinyl-clad galvanized materials. This includes steel wire fencing, fence posts, rails, gates, barbed wire, tension wire, and tie wire.
Q5: What are the material requirements based on location?
A: Galvanized fabric and hardware are used for inland locations, while vinyl-clad fabric, barbed wire, tension wire, tie wire, and gate infilling can be used within 1.5 km of the sea. However, fencing enclosing or crossing over a ground grid and passing under overhead powerlines of 230 kV and above must use galvanized fabric and hardware regardless of location.
Q6: How should the bottom of the chain link fabric be secured for Type I Security Fencing?
A: The bottom of the chain link fabric for Saudi Aramco Security Fencing Type I should be tied to a continuous concrete anchor as per Standard Drawing AC-036680.
Q7: What are the specifications for tubular steel posts?
A: Tubular steel posts specified in the Purchase Order and/or drawings should be Schedule 40 and galvanized in accordance with ASTM A53. The post diameters should follow Table 1 of the standard.
Q8: What are the requirements for concrete footings and grade beams?
A: Concrete footings and grade beams should have a minimum compressive strength of 27.6 MPa (4000 psi) at 28 days. The post footing should be coated with two coats of coal tar or bitumen coating according to SAES-Q-001.
Q9: What concrete material should be used for the footings and grade beams?
A: The concrete material should comply with 09-SAMSS-097 “Ready-Mixed Portland Cement Concrete.”
Q10: Are there different types and sizes of gates for the different types of fencing?
A: Yes, Table 3 outlines the applicable gate sizes for each type of Saudi Aramco fencing, measured from inside to inside of the gate posts.
Read Also:
SAES-M-001 PDF download – Structural Design Criteria for Non-Building Structures
SAES-M-005 PDF Download – Design and Construction of Fixed Offshore Platforms
Pingback: SAES-M-009 PDF Download - Design Criteria for Blast Resistant Buildings - PDFYAR - Engineering Notes, Documents & Lectures
Pingback: SAES-M-100 PDF Download - Saudi Aramco Building Code - PDFYAR - Engineering Notes, Documents & Lectures