TEST AND INSPECTION PER: 02-SAMSS-011, Relevant Industry and Applicable Standard Drawings as defined in the Purchase Order.
SPECTACLE PLATES, SPACERS, BLANKS(Note 2)
Pre-Fabrication/Production Requirements |
Specification Details / Notes: |
| Material Test Reports (MTR’s): | Including heat analysis, product analysis, and carbon equivalent. |
| Welding Procedure Specification (WPS) and Procedure Qualification Records (PQR) | If spectacle plate is o a welded construction. |
In process inspection & test requirement |
Specification Details / Notes: |
| Mechanical Testing: Tensile Test, Impact test, Hardness Test | Per PO requirement |
| Heat Treatment | When required by specifications referenced in the Purchase Order. |
| Nondestructive Testing (When Required) | NDT requirements are defined in the individual ASTM & API requirements. |
| Production Weld Hardness Test | If applicable. |
| Workmanship, Finish, and Appearance | |
| Final inspection & test requirements | Specification Details / Notes: |
| Raised Face Gasket Surface Finish | ANSI B46.1: Flange face surfaces shall have a finish of 3.2 to
6.4 micro-meters. |
| Flat Faced Flange Finish | Finish in accordance with MSS SP-6. |
| Final Visual and Dimensional Inspection Including Marking Verification | |
| Protective Coating, End Covers, and Packaging |
Notes:
- May only be waived by the responsible Saudi Aramco, ASC, or AOC Inspection Offices
- See form SA175 – 000003 for instructions on using this
- Additional Inspection shall be performed Per SAEP 347 if the material procured from
