TEST AND INSPECTION PER: SAEP-347 and P.O. requirements.
Stockist Supplied Inspectable Materials | INSPECTION & TESTING
Pre-Fabrication/Production Requirements |
Specification Details / Notes: |
In process inspection & test requirement |
Specification Details / Notes: |
Final inspection & test requirements |
Specification Details / Notes: |
| Verify Manufacturer Approval | |
| QC Personnel Qualification | As per SAEP-347-Attachment-I. |
| Measuring & Testing Equipment Calibration | (If applicable). |
| Review Stockiest’s Purchasing Document | Verify stockist direct puchase from an approved manufacturer. |
| Verify Materials Limitations | As per SAEP-347-Table-1. |
| Material Test Reports | Original Manufactures Certificates to be reviewed and stamped as original copies to be provided to Buyer Representative. |
| Mechanical/Chemical and Non-Destructive Testing Reports (as per P.O. requirements) | Original Manufactures Certificates to be reviewed and stamped as original copies to be provided to Buyer Representative. |
| Stockiest’s Inspection Report and Certificate of compliance | Stockiest shall accept materials prior to Buyer Representative Inspection. |
| Material Identification & Traceability | As per SAEP-347. |
| Marking | As per SAEP-347 and P.O. requirements. |
| Visual Inspection | |
| Dimensional & Tolerance | |
| Positive Material Idnetification (PMI) | Alloy verification when PMI is not performed by the Manufacturer. As per SAEP-347 and Inspection Plan SA-175-320300. |
| Coating | As per P.O. requirements. |
| Protection & Packaging | |
| Valve Hydrostatic Testing | As per sampling criteria of 04-SAMSS-048. |
Additional/Supplemental Requirements |
Specification Details / Notes: |
Notes:
- May only be waived by the responsible Saudi Aramco, ASC, AOC Inspection
- See form SA-175-000003 for instructions on using this
