This article is about telecommunication standards, telecom installation standards, telecommunication system in building, telecommunication installation process, Telecommunication closet standards, telecommunications design, telecommunication equipment list and telecommunication guidelines.
Design and Installation Codes and Standards for Telecommunications Infrastructure
When designing and installing a telecommunications infrastructure, it is essential to follow specific codes and standards to ensure the safety of individuals and property, as well as to ensure the quality of construction. These codes and standards are regularly updated, and it is the responsibility of the designer, contractor, and installer to stay up-to-date with any changes.
Here are the codes and standards that must be followed for the design and installation of telecommunications infrastructure:
telecommunication standards
BICSI ITSIMM: Information Technology Systems Installation Methods Manual
BICSI TDMM: Telecommunications Distribution Methods Manual
ANSI/NECA/BICSI – 568-C.0: Standard for Installing Commercial Building Telecommunications Cabling
ANSI/TIA/EIA 569: Commercial Building Standards for Telecommunications Pathway and Spaces
ANSI/TIA/EIA 568: Generic Telecommunications Cabling for Customer Premises Standard Series
ANSI/TIA/EIA 606: Administration Standard for Commercial Telecommunications Infrastructure
ANSI J-STD-607: Commercial Building Grounding (Earthing) and Bonding Requirements for Telecommunications
ANSI/TIA/EIA 758: Customer Owned Outside Plant Telecommunications Cabling Standard
ANSI/TIA/EIA-526, 7 & 14: Telecommunications Measurements of Optical Fiber Single and Multi-Mode Power Loss
ANSI/EIA 310: Cabinets, Racks, Panels and associated Equipment
ANSI/SCTE 15 2001: Specifications for Trunk, Feeder, and Distribution Coaxial
ANSI/SCTE 74: Specification for braided 75 ohm Flexible Coaxial Cable
ANSI/TIA/EIA 862: Building Automation Systems Cabling Standard for Commercial Buildings
ANSI/INFOCOMM 1M-2009, 2M-2010, 3M 2011: Audiovisual Systems Design
FCC Part 68: Connection of Terminal Equipment to the Telephone Network
FCC Part 76: Cable Television Service
ADA of 1992 and Telecommunications Act of 1996: Physically Impaired and Accessibility
IEEE 802: Standard for Local and Metropolitan Area Networks: Overview and Architecture
IEEE 802.3.xx: Physical and Data Link layer standards for LANs, including Ethernet, Fast Ethernet, Gigabit Ethernet, and 10 Gigabit Ethernet
IEEE 802.1.xx: Wireless LANs
IEEE 802.16: Broadband Wireless Metropolitan Area Networks
IEEE C2-NESC: National Electrical Safety Code
NFPA-70 NEC: National Electrical Code
NFPA-76: Recommended Practice for Fire Protection of Telecommunications Facilities
NFPA 101: Life Safety Code
All applicable State, Municipal & Campus codes, standards, and Statutes
Following these codes and standards will ensure the safety of individuals and property and the quality of construction for telecommunications infrastructure. As these codes and standards are updated regularly, it is essential to stay informed and updated with the latest changes. Designers, contractors, and installers should take responsibility for staying informed and comply with these new regulations.