Fan Coil Receiving, Handling, Storage and Preservation Checklist

This article is about Fan Coil Receiving, Handling, Storage and Preservation Checklist as per International Codes and standards.

Fan Coil Receiving, Handling, Storage and Preservation Checklist

Receiving

1. Contractor shall visually inspect all incoming equipment for damage and for conformance to all applicable requirements, including the supplier inspection release with verified Material Test Reports (MTR)
2. An identification tag or name plate made of 316 stainless steel or better, shall be attached to each equipment unit, securely with stainless steel or Monel fasteners.
3. The tag or name plate shall be marked by raised letters or die-stamping with at least the following information:
   a) Purchase Order Number
   b) Manufacturer
   c) Part/Model No.
   d) Serial No.
   e) Date of Manufacture
   f) Mark/Tag No.”
4. Casings shall include doors to provide maintenance and removal access for all fans, motors, coils, filters, and humidifiers.

Handling, Storage and Preservation

Verify that Approved procedures for handling, storage and preservation lists all the required inspection schedules for maintaining the quality of the Fan Coil.

Standards Codes and References For Fan Coil Receiving, Handling, Storage and Preservation

1. SAES-K-001 – Heating, Ventilating and Air Conditioning (HVAC).
2. SAER 1972– Saudi Aramco Materials Inspection and Testing.
3. 2-SAES-K-100 – Saudi Aramco Mechanical (HVAC) Code
4. Uniform Mechanical Code (UMC)
5. Uniform Fire Code (UFC), 1997.
6. Air Cooled Condenser Receiving Inspection and Storage Checklist
7. HVAC Filters Receiving, Storage, Handling and Preservation
8. HVAC Metal Duct, Hangers and Supports and Insulation Receiving.
9. HVAC Chilled Water Piping Lay-out and Support.
10. HVAC Condensate Drain Installation | HVAC Engineering.
11. HVAC Two Way and Three Way Control Valve Arrangement (Chilled Water Lines).
12. HVAC Air Handling Unit (AHU) Installation | HVAC Engineering.
13. Chilled Water System Components Receiving, Handling, Storage and Preservation Inspection.
14. HVAC Exhaust Fan Receiving, Handling and Preservation.
15. HVAC Air Handling Unit (AHU) Receiving, Handling, Storage and Preservation..
16. HVAC Duct System Handling, Storage and Preservation.