TEST AND INSPECTION PER: 02-SAMSS-006, & Specifications As Noted Below
FITTINGS: For Use In HOT TAP and/or Stopple Operations; Wet & Sweet Sour Services; Include – Split Tees, Stopple Fittings, Full Encirclement Saddles, Flanges, Lock-O-Ring (LOR) Flanges.
Pre-Fabrication/Production Requirements |
Specification Details / Notes: |
| Material Test Reports (MTR#s) | 02-SAMSS-006: Includes chemical composition and mechanical testing. The material for the flange shall conform with 02-SAMSS-011 |
| Welder Qualification Records | Per ASME Sec. IX. |
| Welding Procedures Specifications (WPS#s) and Procedure QualificationRecords (PQR#s) | Per ASME Sec. IX and 02-SAMSS-006 |
| NDT Personnel & Procedures | Check for valid personnel certification and procedure. RT Film interpreter to meet SAEP-1142 requirements. |
In process inspection & test requirement |
Specification Details / Notes: |
| Hardness test | Per 02-SAMSS-006 |
| Heat treatment | Per 02-SAMSS-006 |
| Nondestructive Testing: | Per 02-SAMSS-006 |
| a) Radiographic Testing | All butt welds in fabricated fittings shall be 100% radiographed in accordance with ASME VIII Div.1, UW-51. |
| b) Magnetic Particle Testing | 02-SAMSS-006: For full penetration groove welds, in accordance with ASME VIII Div. 1 Appx. 8. |
| c) Magnetic Particle Testing or Dye Penetrant of Weld Ends for Field Welding | 02-SAMSS-006: All butt weld ends shall be tested PT (ASTM E165). Accept/reject to ASME Sec VIII, Div. 1, Appx.8 or MT (ASME Sec. VIII Div. 1 Appx. 8). |
| d) Ultrasonic Testing of Plates | In accordance with ASTM A578, acceptances level C or equal. |
| Heat Treatment after Forming and Welding | 02-SAMSS-006 and A234 or MSS SP-75: Limitations denoted in SAMSS. |
| Repair Procedure of Defects | Per 02-SAMSS-006. Vendor shall submit details of the repair procedure and nondestructive testing of the repair area for Inspection’s approval prior to making the repair. |
Final inspection & test requirements |
Specification Details / Notes: |
| Hydrostatic Tests | Per 02-SAMSS-006 |
| Final Visual and dimensional Inspections | Per 02-SAMSS-006 |
| Marking | Per 02-SAMSS-006 |
| Preparation for Shipping | Per 02-SAMSS-006 and Purchase Order requirement. |
Notes:
- May only be waived by the responsible Saudi Aramco, ASC, AOC Inspection
- See form SA175 – 000003 for instructions on using this
