TEST AND INSPECTION PER: ASME B16.5, ASTM B564 and Specifications as Noted Below
FLANGES: NICKEL ALLOY | NSPECTION & TESTING
| Pre-Fabrication/Production Requirements | Specification Details / Notes: |
| Forging Process | Per ASME B16.5 |
| Material Test Reports: of Cast or Heat Analysis, Product analysis and Carbon equivalent | Per ASME B16.5 |
| NDT Procedures and Personnel | Verify valid personnel qualification and approved procedure |
| In process inspection & test requirement | Specification Details / Notes: |
| Forging operation/process | One per PO line item |
| Heat Treatment | Per ASTM B564 |
| Tensile Test | Per ASTM B564 |
| PMI requirement | Per SAES-A-206 and SA-175 form 320300. Burn mark shall be removed. |
| Grain size | Per ASTM B564. It is required only for high temperature alloys. |
| Chemical analysis | |
| Final inspection & test requirements | Specification Details / Notes: |
| Workmanship, Visual and Dimensional Inspection. | Per ASME B 16.5, the respective ASTM / Industrial Standard and approved drawings. |
| Inspection of Raised Face Gasket Surface | Per ASME B16.5 |
| Markings | Per ASME B16.5 |
| Protective Coating, End Covers & Packaging. | Per purchase order requirement.(As applicable) |
| Special Flange Dimensions (when applicable) | Per purchase order requirement |
| Additional/Supplemental Requirements | Specification Details / Notes: |
| Liquid penetrant Testing | Per ASTM B564 S 5.3 |
| Ultrasonic Testing | Per ASTM B564 S 5.2 |
Wait for New Article of Course
Button with Countdown Timer