TEST AND INSPECTION PER: ISO 10380 and Specifications As Noted Below
HOSE : CORRUGATED METAL HOSES AND HOSE ASSEMBLIES
Pre-Fabrication/Production Requirements |
Specification Details / Notes: |
| Material Test Reports | Per ISO 10380 |
| Type test | Per ISO 10380 (Section 6.3 & 6.4) |
| Welding procedure, Welder qualification (if applicable) | Verify approved procedure and Valid qualified personnel per ISO 10380 (Section 4.15). Hose joining is not permitted. |
| In process inspection & test requirement | Specification Details / Notes: |
Final inspection & test requirements |
Specification Details / Notes: |
| Heat Treatment | Per ISO 10380 (Section 4.4) |
| Visual and Dimensional Inspection | Per ISO 10380, PO requirement and approved drawings |
| Elongation test and Bend test | Per ISO 10380 (Section 5.4, 5.6 & 5.7) |
| Electrical conductivity | Per ISO 10380 (Section 5.8). 100% witness is required. |
| Leak tightness test | Per ISO 10380 (Section 5.2). The leak tightness test shall be performed before any external protection, if used, is fitted. |
| Pressure Resistance test (Pneumatic or Hydraulic) | Per ISO 10380 (Section 5.3). 100% witness is required |
| Burst pressure test | Per ISO 10380 (Section 5.5). One per order |
| Markings and packaging | Per ISO 10380 (Section 7.3 & 7.4) and PO requirement |
Additional/Supplemental Requirements |
Specification Details / Notes: |
| Other if any per PO |
Notes:
- May only be waived by the responsible Saudi Aramco, ASC, or AOC Inspection
- See form SA 175 -000003 for instructions on using this form
