This article is about article list of all NEC (National Electric Code) Standard and defined one by one.
- Article 100 Definitions
- Article 110 Requirements for Electrical Installations
- Article 200 Use and Identification of Grounded Conductors 72
- Article 210 Branch Circuits
- Article 215 Feeders
- Article 220 Branch-Circuit, Feeder, and Service Calculations 117
- Article 225 Outside Branch Circuits and Feeders
- Article 230 Services
- Article 240 Overcurrent Protection
- Article 250 Grounding and Bonding
- Article 280 Surge Arresters, Over 1 kV
- Article 285 Surge-Protective Devices (SPDs), 1 kV or Less 286
- Article 300 Wiring Methods
- Article 310 Conductors for General Wiring
- Article 312 Cabinets, Cutout Boxes, and Meter Socket Enclosures 359
- Article 314 Outlet, Device, Pull, and Junction Boxes; Conduit Bodies; Fittings; and Handhole Enclosures 365
- Article 320 Armored Cable: Type AC
- Article 322 Flat Cable Assemblies: Type FC
- Article 324 Flat Conductor Cable: Type FCC
- Article 326 Integrated Gas Spacer Cable: Type IGS 390
- Article 328 Medium Voltage Cable: Type MV
- Article 330 Metal-Clad Cable: Type MC
- Article 332 Mineral-Insulated, Metal-Sheathed Cable:Type MI 398
- Article 334 Nonmetallic-Sheathed Cable: Types NM, NMC, and NMS 401
- Article 336 Power and Control Tray Cable: Type TC 407
- Article 338 Service-Entrance Cable: Types SE and USE 409
- Article 340 Underground Feeder and Branch-Circuit Cable: Type UF 412
- Article 342 Intermediate Metal Conduit: Type IMC
- Article 342 Intermediate Metal Conduit: Type IMC
- Article 348 Flexible Metal Conduit: Type FMC
- Article 350 Liquidtight Flexible Metal Conduit: Type 424
- Article 352 Rigid Polyvinyl Chloride Conduit: Type PVC 426
- Article 352 Rigid Polyvinyl Chloride Conduit: Type PVC 426
- Article 354 Nonmetallic Underground Conduit with Conductors: Type NUCC 434
- Article 355 Reinforced Thermosetting Resin Conduit: Type RTRC 435
- Article 356 Liquidtight Flexible Nonmetallic Conduit: Type LFNC 439
- Article 358 Electrical Metallic Tubing: Type EMT 442
- Article 360 Flexible Metallic Tubing: Type FMT
- Article 362 Electrical Nonmetallic Tubing: Type ENT 447
- Article 366 Auxiliary Gutters
- Article 368 Busways
- Article 370 Cablebus
- Article 372 Cellular Concrete Floor Raceways
- Article 374 Cellular Metal Floor Raceways
- Article 376 Metal Wireways
- Article 378 Nonmetallic Wireways
- Article 380 Multioutlet Assembly
- Article 382 Nonmetallic Extensions
- Article 384 Strut-Type Channel Raceway
- Article 386 Surface Metal Raceways
- Article 388 Surface Nonmetallic Raceways
- Article 390 Underfloor Raceways
- Article 392 Cable Trays
- Article 394 Concealed Knob-and-Tube Wiring
- Article 396 Messenger-Supported Wiring
- Article 398 Open Wiring on Insulators
- Article 399 Outdoor Overhead Conductors over 600 Volts 499
- Article 400 Flexible Cords and Cables
- Article 402 Fixture Wires
- Article 404 Switches
- Article 406 Receptacles, Cord Connectors, and Attachment Plugs (Caps) 526
- Article 408 Switchboards and Panelboards
- Article 409 Industrial Control Panels
- Article 410 Luminaires, Lampholders, and Lamps
- Article 411 Lighting Systems Operating at 30 Volts or Less 568
- Article 422 Appliances
- Article 424 Fixed Electric Space-Heating Equipment 578
- Article 426 Fixed Outdoor Electric Deicing and Snow Melting Equipment 590
- Article 427 Fixed Electric Heating Equipment for Pipelines and Vessels 595
- Article 430 Motors, Motor Circuits, and Controllers 599
- Article 440 Air-Conditioning and Refrigerating Equipment 653
- Article 440 Air-Conditioning and Refrigerating Equipment 653
- Article 450 Transformers and Transformer Vaults (Including Secondary Ties) 665
- Article 455 Phase Converters 682
- Article 460 Capacitors 684
- Article 470 Resistors and Reactors 687
- Article 480 Storage Batteries 688
- Article 490 Equipment, Over 600 Volts, Nominal 691
- Article 500 Hazardous (Classified) Locations, Classes I, II, and III, Divisions 1 and 2 702
- Article 501 Class I Locations 727
- Article 502 Class II Locations 754
- Article 503 Class III Locations 763
- Article 504 Intrinsically Safe Systems 768
- Article 505 Zone 0, 1, and 2 Locations 774
- Article 506 Zone 20, 21, and 22 Locations for Combustible Dusts or Ignitible Fibers/Flyings 793
- Article 510 Hazardous (Classified) Locations — Specific 801
- Article 511 Commercial Garages, Repair and Storage 801
- Article 513 Aircraft Hangars 808
- Article 514 Motor Fuel Dispensing Facilities 812
- Article 515 Bulk Storage Plants 820
- Article 516 Spray Application, Dipping, and Coating Processes 826
- Article 517 Health Care Facilities 835
- Article 518 Assembly Occupancies 865
- Article 520 Theaters, Audience Areas of Motion Picture and Television Studios, Performance Areas, and Similar Locations 870
- Article 522 Control Systems for Permanent Amusement Attractions 888
- Article 525 Carnivals, Circuses, Fairs, and Similar Events 891
- Article 530 Motion Picture and Television Studios and Similar Locations 895
- Article 540 Motion Picture Projection Rooms 899
- Article 545 Manufactured Buildings 901
- Article 547 Agricultural Buildings 903
- Article 550 Mobile Homes, Manufactured Homes, and Mobile Home Parks 908
- Article 551 Recreational Vehicles and Recreational Vehicle Parks 921
- Article 552 Park Trailers 938
- Article 553 Floating Buildings 950
- Article 555 Marinas and Boatyards 951
- Article 590 Temporary Installations 958
- Article 600 Electric Signs and Outline Lighting 966
- Article 604 Manufactured Wiring Systems 978
- Article 605 Office Furnishings (Consisting of Lighting
- Accessories and Wired Partitions) 980
- Article 610 Cranes and Hoists 982
- Article 620 Elevators, Dumbwaiters, Escalators, Moving Walks, Platform Lifts, and Stairway Chairlifts 991
- Article 625 Electric Vehicle Charging System 1009
- Article 626 Electrified Truck Parking Spaces 1018
- Article 630 Electric Welders 1024
- Article 640 Audio Signal Processing, Amplification, and Reproduction Equipment 1028
- Article 645 Information Technology Equipment 1037
- Article 647 Sensitive Electronic Equipment 1043
- Article 650 Pipe Organs 1045
- Article 660 X-Ray Equipment 1046
- Article 665 Induction and Dielectric Heating Equipment 1049
- Article 668 Electrolytic Cells 1053
- Article 669 Electroplating 1057
- Article 670 Industrial Machinery 1058
- Article 675 Electrically Driven or Controlled Irrigation Machines 1061
- Article 680 Swimming Pools, Fountains, and Similar Installations 1064
- Article 682 Natural and Artificially Made Bodies of Water 1095
- Article 685 Integrated Electrical Systems 1098
- Article 690 Solar Photovoltaic (PV) Systems 1099
- Article 692 Fuel Cell Systems 1125
- Article 694 Small Wind Electric Systems 1129
- Article 695 Fire Pumps 1138
- Article 700 Emergency Systems 1156
- Article 701 Legally Required Standby Systems 1173
- Article 702 Optional Standby Systems 1178
- Article 705 Interconnected Electric Power Production Sources 1181
- Article 708 Critical Operations Power Systems (COPS) 1188
- Article 720 Circuits and Equipment Operating at Less Than 50 Volts 1195
- Article 725 Class 1, Class 2, and Class 3 RemoteControl, Signaling, and Power-Limited Circuits
- Article 727 Instrumentation Tray Cable: Type ITC 1213
- Article 760 Fire Alarm Systems 1214
- Article 770 Optical Fiber Cables and Raceways 1230
- Article 800 Communications Circuits 1244
- Article 810 Radio and Television Equipment 1264
- Article 820 Community Antenna Television and Radio Distribution Systems 1270
- Article 830 Network-Powered Broadband Communications Systems 1282
- Article 840 Premises-Powered Broadband Communications Systems 1299
- Table 1 Percent of Cross Section of Conduit and Tubing for Conductors 1306
- Table 2 Radius of Conduit and Tubing Bends 1310
- Table 4 Dimensions and Percent Area of Conduit and Tubing (Areas of Conduit or Tubing for the Combinations of Wires Permitted in Table 1, Chapter 9) 1310
- Table 5 Dimensions of Insulated Conductors and Fixture Wires 1315
- Table 5A Compact Copper and Aluminum Building Wire Nominal Dimensions and Areas 1319
- Table 8 Conductor Properties 1320
- Table 9 Alternating-Current Resistance and Reactance for 600-Volt Cables, 3-Phase, 60 Hz, 75°C (167°F) — Three Single Conductors in Conduit 1321
- Table 10 Conductor Stranding 1324
- Table 11(A) Class 2 and Class 3 Alternating-Current Power Source Limitations 1325
- Table 11(B) Class 2 and Class 3 Direct-Current Power Source Limitations 1325
- Table 12(A) PLFA Alternating-Current Power Source Limitations 1326
- Table 12(B) PLFA Direct-Current Power Source Limitations 1326
- Informative Annex A Product Safety Standards 1327
- Informative Annex B Application Information for Ampacity Calculation 1333
- Informative Annex C Conduit and Tubing Fill Tables for Conductors and Fixture Wires of the Same Size 1349
- Informative Annex D Examples 1413
- Informative Annex E Types of Construction 1425
- Informative Annex F Availability and Reliability for Critical Operations Power Systems; and Development and Implementation of Functional Performance Tests (FPTs) for Critical Operations Power Systems 1429
- Informative Annex G Supervisory Control and Data Acquisition (SCADA) 1433
- Informative Annex H Administration and Enforcement 1435
- Informative Annex I Recommended Tightening Torque Tables from UL Standard 486A-B 1443