TEST AND INSPECTION PER: 01-SAMSS-017, and Specifications As Noted Below.
PIPING: AUXILIARY; For Mechanical Equipment | INSPECTION & TESTING
Pre-Fabrication/Production Requirements |
Specification Details / Notes: |
| Piping Material & Joining Method | Per 01-SAMSS-017 Table A-1 |
| Valves, Flanges, Elbows and Butt Welding Fittings | Shall be inspected per 04-SAMSS-035, 02-SAMSS-011, & 02-SAMSS-005. |
| NDT Procedures and Personnel Qualification | Verify valid personnel qualification and procedures. |
| Welder Qualification Records | Per ASME IX. |
| Welding Procedure Specifications (WPS) and Procedure QualificationRecords (PQR) | 01-SAMSS-017 and ASME B31.3 |
In process inspection & test requirement |
Specification Details / Notes: |
| Unions, Tubing | Per 01-SAMSS-017 |
| Valves, Fittings and Flanges | Per 01-SAMSS-017 |
| Piping and tubing Joints | Per 01-SAMSS-017 & Table A-1 |
| Radiography (RT) | 10% Random or 100% for piping in hydrocarbon service on offshore platforms |
Final inspection & test requirements |
Specification Details / Notes: |
| Visual and Final Inspection | Per 01-SAMSS-017 |
| Piping, Fitting & Flange Dimensions | Per 01-SAMSS-017 |
| Vent, drain Valves & Plugs | Per 01-SAMSS-017 |
| Hydrostatic Testing | Per 01-SAMSS-017 |
| Cleaning and Painting | Per 01-SAMSS-017 |
| Identification & Marking | Per 01-SAMSS-017 |
| Preparation for shipment | Per 01-SAMSS-017 |
Notes:
- May only be waived by the responsible Saudi Aramco, ASC or AOC Inspection
- See form SA175-000003 for instructions on using this
Wait for New Article of Course
