Piping Interface​ to Other Disciplines

• What is Fillet Welding? | Its Parts, Types, Applications, Symbols, and Differences with Butt Welding

• Electrical Submersible Pumps | Working Principle, Components, Installation, Maintenance, Applications

• What do Pipeline Engineers do? Piping Engineer vs Pipeline Engineer

• How Have Oil and Gas Energy Companies Changed in the Last 20 Years?

• Oil and Gas Industry Outlook 2025

• What Are As-Built Drawings? | Construction Drawings vs As-Built Drawings

• What is CE Marking? Its Full Form, Meaning, Requirements, Notified Bodies, Steps, and Applications

• How is The Complex Oil and Gas Sector Managed? | Oil and Gas Management

• What is a Pressure Switch? Its Working, Types, and Selection

• Oil and Gas Exploration Services

• Role of Civil Engineers in the Oil and Gas Sector

• What is Hydro Jetting?

• Meaning of LO and LC in Valves

• What is Oil and Gas Engineering? | Overview of Petroleum Engineering

• Marketing Strategies in the Oil and Gas Sector for Equipment Supplies

• Projects in the Oil and Gas Industry

• Role of Biologists in the Oil and Gas Sector

• Steps for Oil & Gas Companies to Survive the Energy Transformation

• Supply Chain of the Oil and Gas Industry

• Risk Management in the Oil and Gas Sector

• Investment Banking in the Oil and Gas Sector

• What is Fitness for Service? API 579 Fitness for Service Assessment

• Use of Digital Oilfields by Oil Companies

• Use of Artificial Intelligence (AI) in the Oil and Gas Industry

• What is a Desander? Types, Working, Features, and Selection of Desanders

• What is a Pressure Control Valve (PCV)? Types and Applications of PCV

• What is a Temperature Control Valve? It’s Working, Applications, and Types

• What is PSSR or Pre-Startup Safety Review?

• What is an Orifice Flowmeter? Its Working, Installation, Types, Advantages, and Disadvantages

• What is Level Measurement? Its Types, Working, & Advantages

• What are Lower Explosive Limits (LEL) and Upper Explosive Limits (UEL)?

• Introduction to Smart-Plant Materials-SMAT

• What is Girth Welding? Pipeline Girth Welding

• Industrial Hoisting Equipment Guide: Taking the Manual Strain Out of Material Handling and Lifting Tasks

• Top Construction Companies of the World

• What is Maintenance Engineering? Jobs, Salaries, Roles and Responsibilities of a Maintenance Engineer

• What is an Excavator? Applications and Types of Excavators

• What is High Integrity Pressure Protection System (HIPPS)?

• What is a Septic Tank? Types, Working and Maintenance of Septic Tank Systems

• What is DN and PN Number for Pipes? Pipe Class Rating vs PN Numbers

• What is a Boom Lift? Applications, Sizes, and Types of Boom lifts

• What is a Manifold Valve? Types of Manifold Valves

• What Is White Rust? Its Formation, Prevention, and Treatment

• What is a Fire Pump? Working, Sizing, and Types of Fire Pumps

• Detailed Online Course on Pipe Stress Analysis (25 hours of Content) with Certificate + Free Trial Version of Pipe Stress Analysis Software

• Types of Lines in Engineering Drawing

• What is Instrumentation Engineering? Components and Example of Instrumentation

• What is an Accelerometer? Working, Selection, Application, and Types of Accelerometer

• What is Metal Grating? Types and Uses of Metal Gratings

• What is Driving EPC Digital Transformation?

• Working and Types of Forklifts for the Construction Industry

• Types of Structural Steel Shapes

• How to Calculate Weight of a Steel Plate? Steel Plate Weight Calculator

• What is Structural Steel Fabrication? Its Process Stages, Uses, Advantages

• What is a Sideboom PipeLayer?

• Alarm Management for Oil & Gas Industries

• What is PSV Testing? Its Requirements, Procedure, and Standards

• What are Pickling and Passivation? Their Meaning, Procedure, Advantages, and Differences

• Types and Working of Pressure Regulators

• What is Smart Plant Instrumentation (SPI) Intools?

• Detailed Online Course on Piping Engineering (210 Lectures, 42.5 hours of Content) with Certificate

• types of Anchor Bolts: Their Selection and Uses

• What are Inch-Dia and Inch-Meter? Their Significance and Examples

• What is Project Planning? Its Fundamentals, Tools, and Techniques

• What is Condition-Based Maintenance?

• What is Cold Cutting? Types of Cold Cutting Machines

• Applications, Types, and Working of Oil Water Separators

• What is Kanban? Its Principles, Practices, Benefits, and Tools

• P-Number, F-Number, and A-Number in Welding

• What is Nitrogen Purging? Applications, Procedures, and Benefits of N2 Purging

• What is Inerting? Gases Used for Inerting and Their Selection Criteria

• What is a Non-Return Valve? Types, Functions, Working, and Symbols of Non-Return Valves

• What is Flange Facing? Working and Types of Flange Facing Machines

• Online Course on “Pipe Support Engineering for Industrial Piping Systems” with Certificate

• Snow and Ice Loading on Piping Systems

• What is Hot Bolting? Its Procedure, Hazards, Best Practices, and Advantages

• Types, Applications, Selection, and Specification of Hydraulic Torque Wrenches

• What is a Flange Alignment Tool? Applications, Types, and Working of Flange Alignment Tools

• What is Scrum? Its Values, Principles, Benefits, and Tools

• What is Agile Project Management (APM)? Its Principles, Tools, Methods, Benefits, and Drawbacks

• What is A Vibration Analyzer? Applications and Working of Vibration Analyzers

• What is an RTJ Flange? | Ring Type Joint Flanges

• Piping, Pipeline and Structural Freelancing Works by Whatispiping Team

• What is a Vibration Sensor? Its Application, Working, Types, and Selection

• What is Hydrogen Induced Cracking (HIC)? | Hydrogen Induced Cracking Mechanism

• What is Directional Drilling? | Directional Drilling Companies

• Introduction to Hydrogen Piping and Pipeline Systems | ASME B31.3 vs ASME B31.12

• What is Pipe Flushing | Criteria for Pipe Flushing

• What is Failure Mode Effect and Criticality Analysis (FMECA)? | Types, Uses, Elements, Process, and Advantages of FMECA

• What is a Fire Hydrant? Its Types, Working, Components, and Color Coding

• Basics of Vortex Flow Meter

• Emergency Eye Wash Station and Emergency Shower Requirements

• Rupture Disc: Definition, Types, Components, Selection, Sizing, Advantages, Installation

• Details about Spectacle Blind and Spacers

• What are Insulating Gaskets? Their Types, Components, Applications, Installation

• Level Gauges: Types, Sizing, and Ordering Information | Level Instrument | Level Indicator

• Injection Point and Mixing Points for Process Streams

• Collar Bolts To Maintain Removable Bundles in Heat Exchangers

• What is FMS or Flow Metering Skid?

• Comparison between Piping and Pipeline Engineering : Piping vs Pipeline

• Difference between Tee and Barred Tee

• Stub-in vs Stub-on | Differences between Stub-in and Stub-on Piping Connection

• What is Pump Cavitation? Types, Causes, Effects, and Prevention of Pump Cavitation

• Various Types of Fractional Distillation Process used in Process Plants

• Piping stress analysis and design for 2022 Winter Olympic Games in Beijing was performed using brand new and modern PASS/START-PROF software

• Understanding Pressure and Temperature in the context of Pressure Vessel Design

• Beijing Universal Amusement Park Buried Hot Water Piping Network Project in PASS/START-PROF

• Introduction to Fire Protection System | Fire Fighting System

• Introduction to Pressure Surge Analysis

• Types of Structural Platforms

• General requirements for Field Welding

• Hot and Cold Thermal Insulation for Piping | Calculation of Thermal Insulation Thickness

• Introduction to Hose Couplings | Elaflex Coupling | Todo Coupling

• Underwater Welding & Inspection Overview

• Fired Heaters: Working, Components, Types, Function, Sections, Maintenance

• HVAC Systems: Meaning, Objectives, Components, Types, Selection

• Pressure Vessels: Types, Design, Supports, Applications, Materials

• Corrosion Monitoring Techniques & Surveys

• Valve Inspection & Testing | API 598 | Third Party Valve Inspection

• Aboveground Storage Tanks: Types, Components, Design Aspects, and Erection

• Overview of Pile Foundation Design

• Types of Piping Drawings

• Buried GRP/FRP pipe Laying and Installation Procedure

• What is HAZOP? Mechanism, Advantages, Applications of HAZOP Analysis

• Various Types of Atmospheric Storage Tanks

• Types of Flow Meters and Their Applications

• Cathodic Protection: Definition, Working Principles, Types, Design, Advantages, Applications

• Basics of Centrifugal Compressors

• Outline of Piping Design: Basic Elements

• Shaft Alignment Methodology for Compressor and Driver

• Technical Aspects Of Equipment Procurement

• Major Factors Affecting the Pump Performance

• Introduction to EOT CRANES & HOISTS

• NPSH for Pumps: Explanation and Effect

• Overview of Plate Heat Exchanger with Steam

• Pipelines Material Selection in the Oil & Gas Industry

• Plant Layout Design Rules | Piping Layout Rule

• Water Hammer Basics in Pumps for beginners

• Check List for Reviewing of Shell & Tube Heat Exchanger Drawings

• Connection procedure (Alignment) of Process Piping with Rotating Equipment

• link to K-FACTORs (MINOR LOSSES) – HOW WE CALCULATE THEM? K-FACTORs (MINOR LOSSES) – HOW WE CALCULATE THEM?

• Long Lead Items for a Process Piping Industry

• Guidelines for Selection of Various Types of Flanges

• Importance of Inter Discipline Check or IDC

• Cooling Towers: Basics, Common terms, Factors Affecting, Cooling Tower Types, Natural Draft Cooling Towers

• Difference between Centrifugal and Reciprocating Compressor

• Process Safety Management (PSM) and Process Safety

• Basics of Shell and Tube Heat Exchangers

• What are Control Valves? | Selection and Types of Control Valves

• Hydrostatic Test and Pneumatic Test of Piping Systems-Hydrotest Vs Pneumatic Test

• Basics of Vibration Monitoring

• Vessel Clips | Vessel Cleats | Pressure Vessel Cleats

• Corrosion Protection for Offshore Pipelines

• PASS/HYDROSYSTEM 4.3 is released

• Managing Technical Information Exchange With Process Equipment / Package Vendors

• Safety Rules during A Field Visit By A Design Engineer

• Hydrocarbons: Its Formation, Migration, and Recovery

• Start-up and Commissioning of the Pipeline

• Temperature Measurement by Filled Thermal Systems

• Basics of Reciprocating Compressors / Difference Between Reciprocating Compressor and Rotary Compressor

• What does Pipe Schedule Mean? Pipe Size Chart and Pipe Schedule 40 thickness

• Mechanical Seals for Rotary Pumps

• Pre-Commissioning and Commissioning Checklist for Flare Package

• Materials for Produced Water Systems

• Overview of Piping and Instrument Interface

• API 610 Pumps vs ANSI / ASME B73.1 Centrifugal Pumps

• Excavation Hazards and Control Measures

• Significance of HOLD in Process Piping Engineering Deliverable

• An article on Tank Pad Foundation

• Oil Mist Lubrication System

• Forms of Corrosion: Corrosion Types

• Contract Essentials for the Oil & Gas Industry

• Overview of Conductivity and Conductivity Measurement

• Micro Tunneling for Pipeline Installation

• What is a Restriction Orifice (RO)? Its Applications, Types, Working, and Sizing

• Carbon Monoxide Poisoning: A Hidden Danger in the Workplace

• Christmas Tree and Wellhead: Function, Components, Difference, Design Codes

• Overview of Air Cooled Heat Exchangers

• Overview of Air Cooled Heat Exchangers

• Vacuum Box Testing of Butt, Fillet, and Lap Weld

• What is an Oxidation-Reduction Potential (ORP)? How is it Measured

• Static Equipment in Oil & Gas Industry

• Hydraulic calculation in piping networks

• Piping Design Guide of Reactors

• What is a Sour Service? | NACE Sour Service Criteria

• Plastic Piping System: Types of Plastic Pipes

• Damaging effects of Low-Velocity Flow In Piping And Pipelines

• Dry Gas Sealing Systems

• Flange Bolt Tightening Procedure | Bolt Tightening Steps

• Dissolved Oxygen and its Measurement

• Brief Explanation of Major Pressure Vessel Parts

• Difference Between PFD and P&ID: PFD vs P&ID

• Pipe Support Friction Coefficient and Frictional Loads on Pipe Supports

• Overview of Gas Treatment: Natural Gas Treatment

• Overview of Offshore Pipeline Systems

• Equipment Nozzle Loads and Means for Reducing Them

• What is a Pressure Gauge? Types of Pressure Measuring Instruments

• Cooling Water Treatment of Cooling Tower

• Liquified Natural Gas: Properties, Uses, Origin, Composition, LNG Process

• Basic Principles of Aboveground GRE Piping System

• LPG Storage Tank Design Calculations

• Pump Commissioning and starting-up: Pump Commissioning Checklist

• Pipeline wall thickness calculation with example

• Positivity: Staying positive: Being positive: How to stay positive at work

• Bracing Connections/Cross bracing Design Example

• Pump Installation Checklist and Best Practices

• What is Winterization? Requirements for the Basic Design of Winterization Systems

• Checking of Design | Design Checking | Design Checklist

• Mechanical Draft and Special Type Cooling Towers

• What is a Reboiler? Types and Selection of Reboilers

• Importance & Impact of Stress Intensification Factor (SIF) in Piping

• Anti Corrosive Coating and Linings for Steel Pipe

• Technical Bid Evaluation Criteria and Vendor Offer Review

• 7 Different Types of Ball Valves | Ball Valve Parts | Ball Valve vs Gate Valve

• Pour Point: Definition, Significance, Features, Measurements, Factors

• Release of PASS/START-PROF 4.85

• Pressure Relief Valve (PRV): Definition, Types, Working, Location, Sizing, Codes and Standards

• Types of Construction Equipment for Oil & Gas Projects

• What is Front End Engineering Design or FEED Engineering? FEED vs Detailed Engineering

• Maximum Shear Stress Theory: Tresca Theory of Failure

• What is Topographic Survey? | Cost of Topographic Survey

• Double Block and Bleed Valve (DBB): Introduction, Working, Benefits, Applications

• Introduction to Composite Piping System

• Surge Relief Valve: Definition, Function, Types, Sizing, Selection

• What is the meaning of Project Kick-Off Meeting? Its Purpose & Agenda

• Slug Catcher: Definition, Types, Selection & Design Steps

• Introduction to Induction Bending | Hot Bending vs Cold Bending

• Corrosion Inhibitors and Their Selection

• Pressure Transient Analysis for Liquid HC Pipelines | Water Hammer Calculation-Joukowsky Formula

• What is Cladded Pipe? | Difference between Clad and Lined Pipe | Weld Overlay

• What is Process Optimization? | Basics and Techniques of Process Optimization

• Introduction to Flange Protectors

• Radiographic Testing: Principle, Procedure, Standards, Advantages, and Disadvantages

• Design of Centrifugal Compressor Piping and Appurtenances excluding Anti-Surge Systems

• Online Piping Engineering Courses from Industry Experts

• Hooke’s Law: Statement, Equation, Graph, Applications, Limitations

• PVC Piping and Fittings | Applications, Manufacturing, Standards, & Support Span of PVC Piping

• Pascal’s law: Definition, Formula, Applications, and Examples

• What is a Globe Valve? Working, Parts, Types

• Bernoulli’s Equation & Principle: Definition, Derivation, Examples, Application

• Venturimeter: Definition, Parts, Working, Equation, Applications, Installation

• Pipe Weight Calculation | Steel Pipe Weight Chart

• Overview of Lateral Buckling and Upheaval Buckling of Pipelines

• Types of Pipe Fittings and Components for Piping, Pipeline, and Plumbing Industry

• What are Flowlines in Oil and Gas? Differences between Flowlines and Pipelines

• Is Oil Renewable Or Nonrenewable I Is Petroleum Renewable or Nonrenewable

• What is Artificial Lift? Its Purpose, Working, Types, Methods, and Selection

• Factory Acceptance Test– What Is FAT, and How Does It Work?

• What is a Monorail Crane? Its Types, Components, Specifications, Advantages, and Applications

• What is a Link Seal? Its Advantages, Applications, Sizing, Working, and Installation

• What is a Pipe Sleeve? Its Functions and Uses

• What is a Wing Nut? Its Working, Types, Materials, Applications, Advantages

• Significance of Space Velocity of Reactor

• What is Valve Coefficient (Cv) or Flow Coefficient? | Importance of Valve Cv

• What is Rigging Equipment?

• What is a Breather Valve? | Breather Valve for Tanks

• What is Concurrent Engineering?

• A36 Steel | Composition, Applications, and Properties of ASTM A36 Steel

• Procurement vs Purchasing: Is there any difference?

• 6 Major Differences between Mass and Weight | Mass vs Weight

• What is Tensile Strength? | Tensile Strength of Steel and Other Materials

• Most Common Types of Steel | Grades of Steel

• Types of Metals and Their Classification

• What is Plasma Cutting?

• What is Fracking? | Working of Fracking or Hydraulic Fracturing

• What is Lean Manufacturing? | Lean Manufacturing Tool

• What is Sheet Metal Fabrication | Sheet Metal Fabrication Process

• 304 vs 316 Stainless Steel: Difference between 304 and 316 Stainless Steel

• What is Case Hardening | Case Hardening of Steel

• What is Normalizing? Definition, Process, Advantages, and Applications of Normalizing

• What Is Annealing Steel | Annealing Process of Steel

• How to Weld Galvanized Steel? | Risks associated with Galvanized Steel Welding

• Thrust Block Design | Working of a Thrust Block in Pipelines

• What is Powder Coating? Its Types, Working, and Applications

• Does Stainless Steel Rust? | Does Stainless Steel Corrode?

• What is Pipeline Welding? | Methods of Pipeline Welding

• How is Steel Made? Steel Production Process

• What is HDPE Pipe? | Types and Design of HDPE Pipes

• Bolts vs Screws: Difference between Bolts and Screws

• Ductile Iron Pipe Dimensions

• What is Ductile Iron? | Types, Properties, and Applications of Ductile Iron

• Carbon Steel vs Stainless Steel: Differences between Stainless Steel and Carbon Steel

• What is Monel? Properties, Applications, Grades, Advantages of Monel

• Welding Positions | Pipe Welding Positions

• Fire Extinguisher: Meaning, Classes, Types, Selection, Use, Inspection

• What is Metal Fatigue? Types, Identification, Determination of Metal Fatigue

• What is Distributed Control System or DCS? | Working and Characteristics of DCS System

• the Function of Nickel in Stainless Steel | Is Nickel in Stainless Steel Harmful?

• Wastewater Treatment: Definition, Process Steps, Design Considerations, Plant Types

• What is a Framework Agreement? | Difference between Framework Agreements and Framework Contracts

• What is Material Safety Data Sheet (MSDS)? | MSDS VS SDS

• link to PiPiping Installation and Erection Procedure

• What is Distributed Control System or DCS? | Working and Characteristics of DCS System

• What is Distributed Control System or DCS? | Working and Characteristics of DCS System

• Wastewater Treatment: Definition, Process Steps, Design Considerations, Plant Types

• What is a Framework Agreement? | Difference between Framework Agreements and Framework Contracts

• What is Material Safety Data Sheet (MSDS)? | MSDS VS SDS

• Piping Installation and Erection Procedure

• Heat Affected Zone (HAZ): Definition, Causes, Effects, Color Bands, Reduction

• Brittle Fracture and Ductile Fracture: Definition, Mechanism, Differences

• Job Safety Analysis: Definition, Purpose, Requirements, Team composition, Procedure, Sample Format

• Pour Point: Definition, Significance, Features, Measurements, Factors

• Release of PASS/START-PROF 4.85

• Types of Maintenance

• Method Statement for Storage Tank Construction

• Method Statement for Storage Tank Construction

• What is Information Security?

• H-beam vs I-beam | Major Differences | H-beam Size Chart | I-beam Size Chart

• Types of Construction Equipment for Oil & Gas Projects

• What is Lock Out Tag Out or LOTO? | LOTO Safety Procedure

• Introduction to Finite Element Analysis or FEA

• Shear Modulus or Modulus of Rigidity

• Preventive Maintenance: Definition, Types, Philosophy, Advantages, and Disadvantages

• What is a Project Manager? | Roles of a Project Manager

• What is a Deluge Valve? | Types and Working of Deluge Valves

• PMP Certification: Importance and Preparation Steps

• What is Front End Engineering Design or FEED Engineering? FEED vs Detailed Engineering

• Maximum Shear Stress Theory: Tresca Theory of Failure

• What is Topographic Survey? | Cost of Topographic Survey

• Brownfield vs Greenfield: Differences between a brownfield and greenfield project

• Double Block and Bleed Valve (DBB): Introduction, Working, Benefits, Applications

• Moment of Inertia: Introduction, Definition, Formula, Units, Applications

• Deluge System: Definition, Working, Applications, and Advantages

• Centrifugal vs Positive Displacement Pump: Differences between a Centrifugal Pump and a Positive Displacement Pump

• Introduction to Composite Piping System

• What are the Differences Between a Pump and a Compressor? Pumps vs Compressors

• Flange Bolt Torque Calculation and Pipe Flange Bolt Torque Chart

• Surge Relief Valve: Definition, Function, Types, Sizing, Selection

• What is the meaning of Project Kick-Off Meeting? Its Purpose & Agenda

• Slug Catcher: Definition, Types, Selection & Design Steps

• Emergency Shutdown System or ESD System

• Poisson’s Ratio-Formula, Significance, Equation, Example

• Introduction to Induction Bending | Hot Bending vs Cold Bending

• Corrosion Inhibitors and Their Selection

• introduction to Safety Instrumented Systems (SIS)

• Pressure Transient Analysis for Liquid HC Pipelines | Water Hammer Calculation-Joukowsky Formula

• Flare System: Definition, Types, Components, and Design

• What is Cladded Pipe? | Difference between Clad and Lined Pipe | Weld Overlay

• What is Process Optimization? | Basics and Techniques of Process Optimization

• Introduction to Flange Protectors

• What is the Reynolds Number? The Equation for Reynolds Number and its Significance

• Radiographic Testing: Principle, Procedure, Standards, Advantages, and Disadvantages

• Design of Centrifugal Compressor Piping and Appurtenances excluding Anti-Surge Systems

• What is the Pressure Equipment Directive (PED)?

• Factor of Safety: Definition, Equation, Examples, Calculator

• Free Body Diagram: Definition, Purpose, Examples, Steps

• Flexible Metal Hoses: An essential guide

• Online Piping Engineering Courses from Industry Experts

• Overview of Slip Joints

• Hooke’s Law: Statement, Equation, Graph, Applications, Limitations

• Young’s modulus | Modulus of Elasticity | Elastic Modulus | Young’s Modulus of Steels

• What is Positive Material Identification or PMI ? | Methods, Applications, and Advantages of PMI

• PVC Piping and Fittings | Applications, Manufacturing, Standards, & Support Span of PVC Piping

• Introduction to Stress-Strain Curve

• Pascal’s law: Definition, Formula, Applications, and Examples

• Dye Penetration Test: Definition, Principles, Procedure, Standards, Advantages, and Disadvantages

• Pressure Vessel Nozzles: Definition, Types, Allowable Loads and Design

• Automatic Recirculation Valve: Working Principle, Applications, Advantages, Pump Protection Scenarios

• Plug Valves: Parts, Working, Types, Symbol, Applications, Advantages, and Disadvantages

• Cast Iron vs Cast Steel: How to identify Cast Iron and Steel

• What is a Globe Valve? Working, Parts, Types

• Bernoulli’s Equation & Principle: Definition, Derivation, Examples, Application

• Venturimeter: Definition, Parts, Working, Equation, Applications, Installation

• Pipe Weight Calculation | Steel Pipe Weight Chart

• Casting vs Forging: Key Differences between Casting and Forging

• Scaffolding Definition: Types, Parts, Design, Materials, and Hazards of Scaffolding

• Pipefitters: Jobs, Requirements, Tools, Training, Salaries, and difference with Plumbers

• Overview of Lateral Buckling and Upheaval Buckling of Pipelines

• Actuators: Definition, Parts, Working, Types, Selection

• Ultrasonic Testing: Ultrasonic Testing of Welds

• 15 Most Common Welding Defects, Causes and Remedies

• Types of Pipe Fittings and Components for Piping, Pipeline, and Plumbing Industry

• What are Check Valves? Types, Working, and Symbols of Check Valves

• Overview of Centrifugal Pumps

• Valves in Piping: Valve types

• Bolted Tanks: Bolted Steel Tanks: Design and Construction

• Butterfly Valves: Uses, Types, Working, Advantages, Symbols

• Dynamic Analysis of Piping System

• Types of Flanges for Piping and Pipeline Systems

• Difference Between ASME Sec VIII Div. 1 and Div. 2

• Magnetic Particle Inspection (MPI) Procedure

• Welding Inspector: CSWIP and AWS-CWI

• Two-Phase Separator Design Basics

• What is a P&ID Drawing | P&ID Symbols | How to Read P & ID Drawings

• Introduction to Gate Valves and Gate Valve Types

• Piping Inspection Basics

• Storage Tank Erection: Conventional vs Jacking Method

• What is Fireproofing? Types, Materials, Methods

• Storage Tank Failure: Examples, Causes, and Prevention

• Material Handling Systems in Construction

• Camouflaging of Oil Storage Tanks

• Difference between API 650 and API 620 Tanks: API 650 vs API 620

• Bolting Features in Bolted Connections/Bolted Joints

• Steam Trap Installation Best Practices

• What is Chemical Cleaning? Procedure and Examples

• Stress Analysis of Surface Laid Pipelines

• Difference between ASME B16.47 Series A and Series B Flanges

• Vacuum Breaker: Uses, Working, Function, Installation

• Nozzle Reinforcement Calculation for a Cylindrical Nozzle

• Who is a Piping Design Engineer or Piping Designer or Piping Layout Engineer?

• Piping Engineer: Types, Roles, Career, Skills, Jobs

• Pipe Thickness Calculation of Straight Pipe under External Pressure/ Vacuum Pressure Condition

• Reciprocating Pump: Introduction, Definition, Parts, Working Principle, Advantages, Disadvantages, and Applications

• Phases/Stages of Oil and Gas Projects | Oil and Gas Project Life-Cycle

• Oil and Gas Industry-Upstream, Midstream, Downstream | Petroleum Industry- Products, Companies, Future

• Miter Bend Formula to Calculate Length, Angle of Cut, Weight, and Cut-back of the Miters?

• Engineering Deliverables for Chemical, Oil & Gas Projects

• Dish and Nozzle Center line Distance Calculation from Nozzle Orientation of Pressure Vessel

• Difference between Primary loads and Secondary loads in a Piping System

• Stress or Strain: Which comes first?

• Spring Hanger Pipe Support Selection Procedure for Piping Stress Analysis

• B31.4 vs B31.8-Differences between ASME B31.4 and ASME B31.8

• Pressure Temperature Rating and Flange Rating of ASME Flanges

• 13 major differences between Seamless and Welded Pipe

• What Are The Pump Affinity Laws? Explanation with a Sample Calculation

• Pressure vs Stress: What are the differences between Pressure and Stress?

• Comparison of Pipe and Tube | Pipe Vs Tube

• Pump NPSH Available & Required: Meaning, Relation, Impact

• Considerations for Storage Tanks Nozzles Orientation

• Pump Suction Intake Design with Sample Calculation

• New, Extended Capabilities of PASS/Nozzle-FEM

• Types of Pumps used in Process Plants

• Guide for Coating Selection for External Bolting to Reduce Corrosion

• Top EPC companies of UAE (Abu Dhabi, Dubai, and Sharjah) to try for employment opportunities

• Hazards of Cranes and Crane safety during Construction

• Hot Tapping on Operating Lines

• Overview of Corrosion Under Insulation (CUI) | Thermal Sprayed Aluminium (TSA)

• Factors Affecting Line Sizing of Piping or Pipeline Systems

• Software Based Pipeline Leak Detection

• What is Produced Water? | Produced Water Treatment Processes

• Piping Stress Man-hour estimation process for a specific Project

• Piping Design Guidelines for Horizontal Drums

• Drilling Rigs: Types of Drilling Rigs

• Overview of Gas Sweetening Methods/Processes

• Offshore Pipeline Design Guidelines

• What is Fluid Flow?

• Pipeline Stress Analysis

• Process Design of Centrifugal Compressor System

• Material Selection & Quality Management for a Cross Country Pipeline

• Rotary Selector Valve (RSV) and Multi Phase Flow Meter (MPFM)

• Process Engineering Deliverables for EPC of Oil and Gas industries

• Few points on GIS and Petroleum Industry

• 10 Considerable Points for Pressure Vessel Nozzle Load Tables

• Video: Piping Stress Analysis and Fluid&Gas Flow Analysis Software 2-way Integration

• What is Temperature? Units of Temperature and it’s Measurement

• AFT Impulse Pulsation Frequency Analysis (PFA) Module

• Elevated Flare systems used in Process Industries

• Types of pressure-relieving devices for protection of pressure vessels

• Pipeline Construction Stages

• Understanding Centrifugal Compressor Surge and Control

• Understand the Harmonic Analysis and Ensure the Pressure pulsation comply with API 674

• Pumps & Pumping Systems

• Emergency Response Procedures and Measures for Process Units

• What is a Thermowell? Types of Thermowell

• Piping Insulation: Types of Pipe Insulation

• Gas Hydrates and Chemical Injection

• Introduction to Marine Loading Arm

• A brief presentation on “Centrifugal Pumps with Speed Control”

• Telegram Channels / Telegram Groups for Piping and Related Engineering

• Pipeline Pigging: Pig Types, Pig Launcher, and Receiver

• Process Design of Marine Systems

• Selection of Valves: Valve Selection Procedure

• Guidelines for Sizing of Restriction Orifice for Single-phase fluids

• Pipeline Virtual Anchor Length Calculation

• Storage Tank design using TANK software and re-rating with API 620 & API 579

• Sun Shades for the Oil and Gas Industry and their Design

• Piping Internal Coating | FBE Coating | Glass-Flake Coating | PE & ROTO Lining

• De-Salting of Crude Oil | Dehydration of Crude Oil

• Control Valve Sizing

• (PDF)Lifting Lug Design with Examples

• What is a Combined Cycle Power Plant?

• pH Analyzers: pH Meters

• Preparation of LC and LG Arrangement

• Video Tutorial Course on “Introduction to the Oil & Gas Industry” by Energy Academix

• Considerations for Project Site Selection

• What is System Earthing?

• Emergency Vents for Storage Tanks

• Interpretation of External Load On Nozzle Flange using PV Elite & Code Case 2901

• Pipe Reducers: Concentric Reducers, Eccentric Reducers

• Butterfly Valves: Uses, Types, Working, Advantages, Symbols

• What is a P&ID Drawing | P&ID Symbols | How to Read P & ID Drawings

• Introduction to Gate Valves and Gate Valve Types

• Stress Analysis of Surface Laid Pipelines

• Pipe Thickness Calculation of Straight Pipe under External Pressure/ Vacuum Pressure Condition