This article is about Review of HVAC System Testing Organization Qualifications as per International Codes and standards.
Review of HVAC System Testing Organization Qualification Checklist
- Testing Adjusting and Balancing (TAB) work shall be accomplished by a balancing contractor who has an organization whose regular activities include testing, adjusting and balancing environmental systems.
- TAB work shall be accomplished by a balancing contractor which utilized regular employees experienced and trained specifically in the total balancing of environmental systems.
- TAB work shall be accomplished by a balancing contractor who has an organization which has satisfactorily balanced at least five systems of comparable type and size.
- TAB work shall be accomplished by a balancing contractor who has an organization which is approved by Saudi Aramco to perform TAB of HVAC systems.
Standards Codes and References For HVAC System Testing Organization Qualification
- SAES-K-001 – Heating, Ventilating and Air Conditioning (HVAC).
- SAES-K-100 – Saudi Aramco Mechanical (HVAC) Code.
- Uniform Mechanical Code (UMC).
- Uniform Fire Code (UFC), 1997.
- HVAC Metal Duct, Hangers and Supports and Insulation Receiving.
- HVAC Chilled Water Piping Lay-out and Support.
- HVAC Condensate Drain Installation | HVAC Engineering.
- HVAC Two Way and Three Way Control Valve Arrangement (Chilled Water Lines).
- HVAC Air Handling Unit (AHU) Installation | HVAC Engineering.
- Air Cooled Condenser Installation | Design | Technical Specification.
- Chilled Water System Components Receiving, Handling, Storage and Preservation Inspection.
- HVAC Exhaust Fan Receiving, Handling and Preservation.
- HVAC Air Handling Unit (AHU) Receiving, Handling, Storage and Preservation..
- HVAC Duct System Handling, Storage and Preservation.
- Commercial Kitchen Hood Installation | Selection | Technical Specification.
- Fan Coil Installation | Checklist | Technical Project Specification
- HVAC Air Filtration Devices Installation | HVAC Engineering
- Fan Coil Receiving, Handling, Storage and Preservation Checklist.