SAES-O-205 PDF - Integrated Security System - PDFYAR - Engineering Notes, Documents & Lectures

This article is about SAES-O-205 which is about Integrated Security System and download SAES-O-205 PDF for Engineers, supervisors and project managers, QCs, QC Supervisors. This is saudi aramco standards of Safety and Security Engineering based on international codes and standards and useful for Engineering Security knowledge to get job as engineers, QC Supervisors and QC managers, Engineering managers and technicians.

SAES-O-205 PDF Download

SAES-O-205

SAES-O-205 PDF Download

Integrated Security System

SAES-O-205 is a mandatory Standard that outlines the requirements for the design and installation of security systems in Saudi Aramco industrial facilities classified under SAES-O-201, Section 4.2. It is essential to use this Standard in conjunction with Security Directive SEC-05, which is issued by the High Commission for Industrial Security (HCIS) under the Ministry of Interior, Government of Saudi Arabia. SEC-05 provides detailed information on the specific requirements mentioned in SAES-O-205. By following both the Standard and SEC-05, comprehensive security measures can be implemented in Saudi Aramco industrial facilities to ensure the safety and protection of the facilities and personnel.

Industry Codes and Standards for SAES-O-205

SAES-O-205 references several industry codes and standards that are relevant to the design and installation of security systems in Saudi Aramco industrial facilities. These include:

National Fire Protection Association (NFPA)

Specifically, NFPA 70, which is the National Electrical Code.

National Electrical Manufacturers Association (NEMA)

NEMA provides standards and guidelines for electrical equipment and systems.

International Electrotechnical Commission (IEC)

IEC 60529, which defines the degrees of protection provided by enclosures (IP Code).

In addition to these industry codes and standards, the Security Directive SEC-05 is an essential reference document. SEC-05 focuses on the implementation of an Integrated Security System, providing detailed requirements and guidelines specific to Saudi Aramco industrial facilities.

By adhering to these industry codes, standards, and security directives, Saudi Aramco can ensure compliance with established best practices and enhance the overall security of their industrial facilities.

Integrated Security System General Requirements

Here are the summarized requirements mentioned in the provided section:

4.1 Integrated Security System (ISS):

Facilities must be protected by an ISS that complies with the standard’s requirements.

4.2 Security system selection:

The choice of security systems deployed at a facility depends on its classification.

4.3 Security Control Center (SCC):

The ISS must be monitored 24/7 in an SCC by trained operators familiar with its procedures, limitations, and capabilities.

4.4 Intrusion Detection & Assessment System (IDAS):

Class 1 & 2 facilities must deploy an IDAS at the external perimeter fence.
The IDAS must be compliant with the existing Tailorable Integrated Security System (TISS) used by Industrial Security Operations (ISO).
IDAS installations should seamlessly integrate into the TISS environment, with integration being the responsibility of the Project Management Team (PMT).
IDAS includes perimeter sensors, cameras, and a computer system for data analysis, alarm triggering, and video display to security personnel.
Performance requirements for IDAS can be found in Section 4.2 of SEC-05.

4.5 Security Access Control System (SACS):

Class 1 & 2 facilities must deploy a SACS at gates to manage access for personnel and vehicles.
The SACS must seamlessly integrate into the existing SACS deployed Kingdom-wide and operated by ISO.
SACS uses existing Saudi Aramco ID cards and is managed and configured using the existing SACS installation.
SACS includes card readers or biometric readers, computer systems for access validation, and local displays for system status.
Local SACS connects to the central SACS Master Computer System (MCS) for data storage, reporting, management, and configuration.
Performance requirements for SACS can be found in Section 4.3 of SEC-05.

Here are the summarized requirements mentioned in the provided section:

4.6 Video Assessment & Surveillance System (VASS):

VASS, including Closed Circuit Television System (CCTV), shall be installed to monitor main gates and critical areas of the facility.
The system shall annunciate an alarm when the video signal is lost and operate on a dedicated local network.
VASS shall process imagery using video analytics to detect and annunciate threats.
Cameras installed for VASS compliance shall have geo-spatial coordinates for accurate display on a Geographical Information System (GIS) map.
Performance requirements for VASS can be found in Section 4.4 of SEC-05.

4.7 Guidelines for security system computers:

Specific guidelines for reliable operation of computers, software, and networks are provided in Section 4.6 of SEC-05.

4.8 Integrated view of security systems:

Security systems should present an integrated view to security personnel, although individual system installations on physically discrete computers may be necessary.
Specific requirements for system integration are outlined in Section 4.7 of SEC-05.

4.9 Structural and location requirements for security systems:

SEC-05 provides specific requirements for facilities housing security systems, including cooling systems, water sources, transformers, telecomm equipment, and plumbing.

4.10 Access control system for plant control rooms:

An access control system (ACS) shall be installed at all plant control rooms, complying with Section 4.9 of SEC-05.
Class 1, 2, or 3 facilities with a plant control room must fully comply with this requirement.

4.11 Design and operation of Security Control Center (SCC):

Facilities with an SCC must fully comply with the requirements specified in Section 4.10 of SEC-05.

4.12 Protection of security system devices:

Security system devices installed in enclosures in the field must be sealed according to IEC 60529 or higher standards to protect against environmental conditions specified in SAES-A-112.
The level of protection provided must be clearly identified and referenced to an internationally recognized standard.

4.13 Plate Recognition System (PRS) at outer gates:

Outer gates leading to major communities, administrative or industrial areas, or designated facilities must deploy a PRS to monitor license plates of entering and exiting vehicles.
The PRS is a standard ISO system referenced in SAES-O-201, Section 4.11.

4.14 Radio Frequency Identification System (RFID) for SACS:

Industrial facilities with SACS must install an RFID system to read vehicle-mounted ID tags when approaching the SACS gate at process facilities.
The RFID system must be fully integrated with SACS.
The RFID is a standard ISO system referenced in SAES-O-201, Section 4.11.

SAES-O-204 PDF Download – Plant Security Lighting

SAES-O-203 PDF Download – Plant Security Gate

SAES-O-202 PDF Download – Plant Security Fencing

SAES-O-201 PDF Download – Application of Security Directives