This article is about SAES-O-206 which is about Security Devices and download SAES-O-206 PDF for Engineers, supervisors and project managers, QCs, QC Supervisors. This is saudi aramco standards of Safety and Security Engineering based on international codes and standards and useful for Engineering Security knowledge to get job as engineers, QC Supervisors and QC managers, Engineering managers and technicians.
SAES-O-206 PDF Download
SAES-O-206Security Devices
The SAES-O-206 Standard establishes necessary guidelines for the design, installation, and utilization of security devices in Saudi Aramco industrial facilities classified under SAES-O-201, Section 4.2. It should be implemented together with Security Directive SEC-06, which is issued by the High Commission for Industrial Security (HCIS), under the Ministry of Interior of the Government of Saudi Arabia. These documents provide comprehensive instructions to ensure the effective implementation of security measures in the specified facilities.
Inspection Devices
Inspection devices are essential for detecting any attempts to smuggle contraband into protected facilities through entry points such as gates. These devices include X-ray systems, Explosive Trace Detectors, and Metal Detection Archways.
X-Ray Systems: Class 1, 2, and 3 facilities are required to deploy X-ray units that comply with Section 4.1.1 of SEC-06, as specified by Industrial Security Operations (ISO). For selecting the appropriate X-ray systems, refer to SAES-O-201, Section 4.11.
Explosive Trace Detectors: Class 1, 2, and 3 facilities are required to deploy Explosive Trace Detectors that comply with Section 4.1.2 of SEC-06, as specified by Industrial Security Operations (ISO). For product selection constraints, refer to SAES-O-201, Section 4.11. Alternatively, K-9 services with an adequate number of dogs and close proximity to the facility can be used as an acceptable alternative for detection.
Metal Detection Archways: Class 1, 2, and 3 facilities are required to deploy Metal Detection Archways that comply with Section 4.1.2 of SEC-06, as specified by Industrial Security Operations (ISO).
Ballistic Protective Glass
Ballistic Protective Glass: Outer gatehouses and gatehouses for Class 1, 2, 3, and 4 facilities, as well as inner gates when specified by Industrial Security Operations (ISO), shall use ballistic protective glass in compliance with Section 4.2.3 of SEC-06. This glass provides enhanced security and protection against ballistic threats.
Barrier Deterrence:
Drop gates and turnstiles are deployed at gates to manage vehicular and pedestrian traffic, and certified crash-rated barriers are installed at main gates and entrances to critical facilities.
Drop Gates: All security gates at industrial facilities shall use drop gates that comply with Section 4.3.1 of SEC-06 to manage vehicular traffic. For product selection constraints, refer to SAES-O-201, Section 4.11.
Turnstiles: Class 1, 2, and 3 facility security gates shall use turnstiles that comply with Section 4.3.2 of SEC-06 to manage pedestrian traffic at industrial facility gates. For product selection constraints, refer to SAES-O-201, Section 4.11.
Crash Barriers: Security gatehouses at Class 1, 2, 3, and 4 facilities shall use certified crash barriers that comply with Section 4.3.3 of SEC-06. These barriers provide vehicular ingress protection at all industrial gates and selected non-industrial gates as determined by Industrial Security Operations (ISO). For product selection constraints, refer to SAES-O-201, Section 4.11.
FAQs
Ballistic protective glass is a specialized type of glass used for enhanced security and protection against ballistic threats.
It is required in all outer gatehouses and gatehouses of industrial facilities classified as Class 1, 2, 3, and 4, as well as in inner gates when specified by Industrial Security Operations (ISO).
Drop gates are security gates designed to manage vehicular traffic at industrial facility gates.
Turnstiles are used to manage pedestrian traffic at security gates of Class 1, 2, and 3 facilities.
Crash barriers are certified barriers used to provide vehicular ingress protection at all industrial gates and selected non-industrial gates of Class 1, 2, 3, and 4 facilities.
Yes, the selection and installation of drop gates, turnstiles, and crash barriers should comply with the specifications outlined in Section 4.3.1, 4.3.2, and 4.3.3 of SEC-06, respectively.
For detailed product selection constraints and guidelines, refer to SAES-O-201, Section 4.11.
Inspection devices are installed to detect any attempts to bring contraband into protected facilities through gates and entry points.
These devices include X-ray systems, explosive trace detectors, and metal detection archways.
Their purpose is to enhance security measures by identifying potential threats and unauthorized items during inspections.
Class 1, 2, and 3 facilities are required to deploy X-ray units, explosive trace detectors, and metal detection archways in compliance with the specifications provided in Section 4.1.1, 4.1.2, and 4.1.3 of SEC-06, respectively.
SAES-O-201, Section 4.11 provides additional details on product selection constraints for these inspection devices.