TEST AND INSPECTION PER: 01-SAMSS-025 & Specifications As Noted Below
Specification for Heavy Duty Polytetrafluoroethylene (PTFE) and Perfluoroalkoxy (PFA) Lined carbon Steel Pipe and Fittings | Inspection & Testing
Pre-Fabrication/Production Requirements |
Specification Details / Notes: |
| Material Test Report | Per 01-SAMSS-025. For pipes and fittings test records shall be per API 5L or applicable ASTM (See Note 3) |
| Inspection and Test Plan (ITP) | Review Manufacturer inspection and test plan. |
| Test procedure | Per 01-SAMSS-025 |
| WPS/PQR/WPQR | Per 01-SAMSS-025 and ASME Sec IX |
| Qualification test | Per 01-SAMSS-025 |
In process inspection & test requirement |
Specification Details / Notes: |
| Pipes and fittings | Per 01-SAMSS-025 (See Note 3) |
| Fabrication and tolerance | Per 01-SAMSS-025 (See Note 3) |
| Weld Quality | Per 01-SAMSS-025 |
| Workmanship | Per 01-SAMSS-025. Interior surface of pipe prior to lining shall be clean and free of sharp corners, burs, rust, scale or other protrusions |
| Antistatic PTFE and PFA lining | Per 01-SAMSS-025 |
| PTFE/PFA material properties, specific gravity & Resistivity | Per 01-SAMSS-025 |
| Linear wall thickness | Per 01-SAMSS-025 Table 1 |
| Tube flattening test | Per 01-SAMSS-025 |
| Heat and temperature test. | Per 01-SAMSS-025 |
Vacuum test |
Per 01-SAMSS-025 |
| Final inspection & test requirements | Specification Details / Notes: |
| Visual and Dimensional Check | Per 01-SAMSS-025 and PO requirement |
| Hydrostatic test | Per 01-SAMSS-025 |
| Electric resistance test | Per 01-SAMSS-025 |
| Electrostatic test | Per 01-SAMSS-025 |
| Venting system | Per 01-SAMSS-025 |
| Marking, Packaging, and Handling | Per 01-SAMSS-025 and PO requirement |
Additional/Supplemental Requirements |
Specification Details / Notes: |
Notes:
- May only be waived by the responsible Saudi Aramco, ASC, or AOC Inspection
- See form IR000003 for instructions on using this
- Carbon steel pipes must be from Saudi Aramco approved source
