This article is about th6320u2008 manual, th6320u2008 manual pdf, th6320u2008 installation manual, th6320u2008 user manual, th6320u2008 wiring diagram, honeywell t6 installation manual pdf, th6220u2000 and th6320wf2003.
th6320u2008 manual – honeywell t6 installation manual pdf
th6320u2008-manual-honeywell-t6-installation-manual-pdfth6320u2008 manual
This is about T6 Pro Programmable Thermostat. Here’s a summary of the information provided:
Optional Cover Plate Installation:
- Square Cover Plate:
- Separate the Cover Plate from the Mounting Plate.
- Mount the Mounting Plate on the wall using any of the 8 screw holes.
- Hang the UWP on the top hook of the Mounting Plate and snap the bottom of the UWP in place.
- Snap the Cover Plate onto the Mounting Plate.
- Rectangular Cover Plate:
- Mount the Cover Plate on the wall using any of the 6 screw holes.
- Hang the UWP on the top hook of the Cover Plate and snap the bottom of the UWP in place.
- If there are no existing wall anchors:
- Position the Cover Plate on the wall, level it, and mark hole positions.
- Drill holes at the marked positions and lightly tap the supplied wall anchors into the wall.
- Use the supplied screws to secure the Cover Plate.
UWP Mounting System Installation:
- Before starting, turn off the power at the breaker box or switch.
- Position the UWP on the wall, level it, and mark hole positions.
- Drill holes at the marked positions and lightly tap the supplied wall anchors into the wall.
- Open the door of the UWP and insert the wires through the wiring hole.
- Place the UWP over the wall anchors and tighten the mounting screws until the UWP is secure. Close the door.
Please note that the specific details and figures referenced in the text are not provided here. It is recommended to refer to the complete installation instructions included with the thermostat for accurate and detailed guidance during the installation process.
