This article is about th6320wf2003 installation manual, th6320wf2003 manual, th6320wf2003 user manual, th6320wf2003 home depot, th6320wf2003 dual fuel, th6220wf2006, honeywell t6 thermostat manual and th6320u2008.
th6320wf2003 installation manual and T6 Pro Smart
This is about T6 Pro Smart Programmable Thermostat th6320wf2003 manual pdf. Here’s a summary of the table of contents and some instructions:
Table of Contents:
- Thermostat Features
- Thermostat Overview
- Resideo App Overview
- Basic Thermostat Operation
- Adjusting the temperature
- Schedule overrides
- Adjusting the temperature in Auto mode
- Selecting system mode
- Built-in compressor protection
- Setting the fan
- WiFi Connectivity
- Connecting to a WiFi network
- Disconnecting and reconnecting to a WiFi network
- Main Menu Settings
- Main menu overview
- Scheduling options
- Setting location-based temperature control and smart scheduling in the Resideo App
- Time-based scheduling
- Turning off scheduling
- Screen lock settings
- Ventilation settings
- WiFi settings
- WAC setting
- Turning thermostat WiFi on and off
- Adjusting backlight brightness
- Enabling/disabling Adaptive Intelligent Recovery
- Setting the time and date
- Cleaning the thermostat screen
- Choosing Fahrenheit or Celsius
- Reset options
- Viewing equipment status
- Viewing thermostat information
- Alerts and maintenance reminders
Appendices:
- General system information
- Troubleshooting
- Frequently asked questions (FAQs)
- Regulatory information
- Warranty information
Instructions for adjusting the temperature and using schedule overrides:
- To adjust the desired temperature, touch “+” or “-” on the thermostat home screen.
- Schedule Overrides:
- Hold Until (temporary hold): Overrides the current temperature set point for a maximum of 12 hours.
- Permanent hold: Overrides the current temperature set point permanently until manually changed or reactivated.
- Vacation hold: Overrides the current temperature set point for a longer period of time. This feature is only activated using the Resideo App.
Instructions for setting temporary hold (for use with time-based schedules):
- Touch “+” or “-” on the thermostat home screen to set the desired temperature. “Hold Until” will appear with the time the hold will end.
- To change when the hold will end, touch the time and wait for it to start blinking. Then, touch “+” or “-” to set the desired end time. Touch “Hold Until” once more to confirm changes and return to the home screen.
Instructions for setting permanent hold:
- Touch “+” or “-” on the thermostat home screen to reach the desired temperature. “Hold Until” will appear with the desired end time.
- Touch “Hold Until.” “Permanent Hold” will appear on the screen. Touch “Permanent Hold” to hold the temperature until manually changed.
To end permanent hold and return to the program schedule, touch “Permanent Hold” and then touch “Run Schedule.”
Please note that the specific details and figures referenced in the text are not provided here. It is recommended to refer to the complete user guide included with the thermostat for accurate and detailed instructions.
