Inspection & Testing

DENSITY TEST EQUIPMENT HYDROMETERS Hydrometers shall meet the requirements set forth in API Manual of… Read More »DENSITY TEST EQUIPMENT

CENTRIFUGE TUBES Each centrifuge tube shall be an 8-inch, 203-millilitre cone-shaped tube with dimensions, scale… Read More »SEDIMENT & WATER TEST EQUIPMENT

Thermometers used to measure the temperature of hydrocarbon liquids in tanks shall conform to the… Read More »TANK THERMOMETERS | PORTABLE ELECTRONIC THERMOMETERS (PET’s)

Gauge tapes, bobs and water gauge bars shall conform to the requirements set forth in… Read More »GAUGE TAPES, BOBS AND WATER GAUGE BARS

1. Purpose This document provides detailed procedure for rope packing operation to be performed during… Read More »Rope Packing Procedure During Lower, Intermediate and Upper Tray Installation

This article is about Annular Chamber Air Tightness Test Procedure, annular type combustion chamber, disadvantages of annular combustion chamber, reverse… Read More »Annular Chamber Air Tightness Test Procedure

1. Scope This document describes the field preservation at site for Items BXX-C-XXXA/B Adsorbent towers’… Read More »FIELD PRESERVATION PROCEDURE | ADSORBENT TOWER INTERNAL

This article is about Weld Repair Procedure for Piping for mechanical, piping and welding engineers… Read More »Weld Repair Procedure for Piping / Beam for Adsorbent Tower Internal

1. Scope This document describes the trial assembly procedure for Items J12-C-02014/B  Adsorbent towers’ internals… Read More »ASSEMBLY PROCEDURE OF ADSORBENT TOWER INTERNAL

1. Purpose This document gives detailed information regarding the Center Pipe centering that must be… Read More »Center Pipe Centering Procedure | Adsorbent Tower